Stainless steel letters, made from raw sheet.
We cut, weld, grind and polish SS 304 and SS 316 letters in our own workshop at Bhayandar. No trading, no sub-contracting — the sheet arrives here and the finished letter leaves here.
Which grade you actually need
Most signage in India is sold as “SS” without saying which grade, and that is where customers get cheated. A 202-grade letter costs less and looks identical for about eight months, then rust bleeds out of the welds. We quote the grade in writing.
| Grade | Where it belongs | What it costs you |
|---|---|---|
| SS 304 | Indoor lobbies, shop fronts, offices, most exterior work away from the coast | Standard rate |
| SS 316 | Coastal air, chemical plants, swimming pools, anywhere with salt or fumes | Roughly 25–35% more |
| SS 202 | Nothing outdoors. We do not use it for exterior signage | Cheapest to buy, first to fail |
Bhayandar, Mira Road, Vasai and the whole western belt sit close enough to the sea that we recommend 316 for any fascia facing open air. Mill test certificates for the sheet can be supplied with the order.
Finishes we produce
- Mirror polish — buffed to a true reflective surface. Sharpest in daylight, picks up ambient light at night. Shows fingerprints at hand height, so it suits fascias more than door plates.
- Hairline / matte — a directional grain that hides marks. The default for reception and corporate signage.
- Gold, rose gold, champagne, black — PVD coating over 304. Holds colour outdoors far longer than paint or foil.
- Brushed and bead-blasted — a soft, non-reflective face for interiors where glare is a problem.
How a letter is actually built
The face is laser cut from 1.2 mm or 1.5 mm sheet. The return — the side wall that gives the letter its depth — is cut as a strip, rolled to the curve of the letterform, and welded to the face from behind. Welds are ground flush and the whole letter is polished as one piece, so no joint line shows.
Standard returns are 25, 40, 50 and 75 mm. Deeper returns cost more because the strip is wider and there is more welding, not because the material is thicker.
What moves the price
- Letter area, not letter count. Nine small letters can cost less than three big ones.
- Grade — 316 over 304 adds roughly a third.
- Return depth — a 75 mm return is around 40% more work than 25 mm.
- Lighting — halo or front-lit adds LED, drivers and wiring.
- Access at site — scaffold or a hydraulic lift is a real line item, not a hidden charge.
Our instant estimate tool puts a number to all of this in about thirty seconds.
Common questions
What thickness of stainless steel do you use for letters?
Faces are normally 1.2 mm for letters up to about 600 mm tall and 1.5 mm above that. The return strip is 1 mm. Thicker faces stay flatter over long spans and resist denting during transport.
Will stainless steel letters rust outdoors?
Not if the grade is right. SS 304 handles ordinary exterior air. Within a few kilometres of the sea, or near chemical exhaust, use SS 316. Rust on a supposedly stainless sign almost always means 202 grade was substituted.
Can stainless steel letters be lit?
Yes. Reverse-lit (halo) is the common choice — LEDs sit inside the letter facing the wall, so the steel reads as a solid silhouette ringed with light. Front-lit needs an acrylic face set into the steel return.
How long does a set of SS letters take?
About seven to ten working days from drawing approval for a standard shop fascia. Illuminated sets and large fascias are scheduled after a site survey.
Also from VAELUX
Get a costed estimate today
Send the sign width, the material you have in mind and a photograph of the wall. That is usually enough for us to quote.